Canon HR10 User Manual - Page 53

• In standby mode, the camcorder will shut off after the time selected for the [ STANDBY OFF] setting. STANDBY OFF ( 39) [ 10 min], [ 20 min], [ 30 min] Select the length of time after which the camcorder will end the standby mode and shut off automatically. IMG QUALITY Disc quality: HD only [ SUPER FINE], [ FINE], [ NORMAL] Select the quality of a still image captured from a scene recorded in HD quality. FILE NOS. * * : only with discs recorded in HD quality. [ RESET], [ CONTINUOUS] Select the image numbering method to be used on a new memory card. Images are automatically assigned consecutive image numbers from 0101 to 9900, and stored in folders containing up to 100 images. Folders are numbered from 101 to 998. [ RESET]: Image numbers will restart from 101-0101 every time you insert a new memory card. [ CONTINUOUS]: Image numbers will continue from the number following that of the last image recorded with the camcorder. • If the memory card you insert already contains an image with a larger number, a new image will be assigned a number one higher than that of the last image on the memory card. • We recommend using the [ CONTINUOUS] setting. TV TYPE [ NORMAL TV], [ WIDE TV] In order to display the picture in full and in the correct aspect ratio, select the setting according to the type of television to which you will connect the camcorder. [ NORMAL TV]: TV sets with 4:3 aspect ratio. [ WIDE TV]: TV sets with 16:9 aspect ratio. • The setting cannot be selected while the camcorder is connected to an HDTV using an HDMI cable. • When the TV type is set to [ NORMAL TV], if you play back a recording made in Widescreen (16:9) the picture displayed on the LCD screen will be smaller than the full display area. • When the TV type is set to [ NORMAL TV], still images cannot be captured from the playback scene ( 83). 53