Canon HR10 User Manual - Page 94

External Connections Standard Definition TV Sets Terminal on the Camcorder Connecting Cable 3 Output connection (signal flow ) to a TV or VCR with AV terminals. Terminal on the Connected Device STV-100 Stereo Video Cable (supplied) Yellow White Red VIDEO AUDIO L R Playback on a TV Screen This section explains how to play back the disc with this camcorder by connecting it to a TV. To play back the disc with another DVD device refer to Disc Playback on an External Device ( 68). The quality of the playback picture will vary depending on the connected TV and the type of connection used. POINTS TO CHECK ( 26) Change the following settings as necessary before making the connections. - [TV TYPE] to match the output video to the aspect ratio of the connected TV ( 53). - [COMP.OUT] to select the output video specifications when using connection type 1 ( 54). Connecting Connect the camcorder to the TV following one of the connection diagrams shown in the previous section Connection Diagrams ( 93). Playback 1 Turn on the camcorder and the connected TV or VCR. On a TV: Select as the video input the same terminal to which you connected the camcorder. On a VCR: Set the input selector to the external video input (usually labeled LINE IN). 2 Start the playback of the movies ( 41) or still images ( 75). NOTES • Sound from the built-in speaker will be muted while the STV-100 Stereo Video Cable is connected to the camcorder. • We recommend powering the camcorder using the compact power adapter. 94