Canon MF7280 imageCLASS MF7280 Sending Guide - Page 133
Stamping Originals, Vertical Placement, Horizontal Placement
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
5 Press (Start). If the original is placed on the platen glass, follow the instructions that appear on the touch panel display ➞ press (Start) once for each original. When scanning is complete, press [Done]. Scanning starts. The document is stored in memory, and then sent to the specified destination at the specified time. NOTE • To cancel a delayed send job, press [Send Settings] ➞ [Delayed Send] ➞ [Cancel]. • To cancel all settings and return the machine to the Standard mode, press (Reset). • You can also cancel a delayed send job from the System Monitor screen. (See "Using the System Monitor Screen," on p. 1-42.) 4 Stamping Originals The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front side of scanned and sent originals. Sending Documents ABC Position at which stamp is applied. ABC Position at which stamp is applied. Vertical Placement Horizontal Placement IMPORTANT The Stamp mode cannot be used with the Document Size or Different Size Originals mode. Sending Methods 4-25