Canon MF7280 imageCLASS MF7280 Sending Guide - Page 311

Error Messages This section explains the various messages that appear on the touch panel display, along with possible causes and remedies. For explanations of messages that are not listed here, see the Reference Guide and Network Guide. Self-Diagnostic Display Perform the necessary procedures according to the displayed self-diagnostic error message. Self-diagnostic error messages appear on the touch panel display at the following times: • When scanning or printing cannot be performed because of an operational error • When you need to make a decision or take some action during scanning or printing • When you need to make a decision or take some action while browsing the network The following is a list of self-diagnostic error messages, along with their possible causes and remedies. Troubleshooting Out of resources. Wait for a moment, then perform operation again. Cause You cannot browse the network. There is a lack of TCP/IP resources because documents have just been continuously sent or are being continuously sent via FTP or Windows (SMB). 11 Remedy Wait for a while, and then try browsing again. Set the IP Address. Cause This machine is not set with an IP address. Remedy Specify the IP Address Settings in TCP/IP Settings in Network Settings in System Settings (from the Additional Functions screen), turn the machine's main power OFF, and then back ON. (See Chapter 3, "Using a TCP/IP Network," in the Network Guide.) Error Messages 11-5