Canon MF7280 imageCLASS MF7280 Sending Guide - Page 52

Introduction to Sending Functions If any dirt on the original scanning area is detected when the originals are scanned using the feeder, the following screen appears. Even though streaks may appear on the scanned image, you can continue to scan your documents by pressing [Done]. It is recommended, however, that you open the feeder, clean the scanning area, and then close the feeder. The following screen will not appear once the scanning area is clean. 1 For instructions on cleaning the original scanning area, see Chapter 6, "Routine Maintenance," in the Reference Guide. IMPORTANT • Do not add or remove originals while they are being scanned. • When scanning is complete, remove the originals from the original output area to avoid paper jams. Original Output Area NOTE • The scanned originals are output to the original output area in the order that they are fed into the feeder. • You can place different size originals together into the feeder if you set the Different Size Originals mode. (See "Different Size Originals," on p. 3-21.) Placing Originals 1-39