Canon PIXMA iP5200 Service Manual - Page 32

15 times Orange (Alarm) Return to the menu selection Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm or Power LED lights steadily without any changes. In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the destination listed in the table below, and press the Power button. Time(s) LED indication Destination CD / DVD print 0 times Green (Power) No change of the destination 1 time Orange (Alarm) Japan Supported 2 times Green (Power) Korea Not supported 3 times Orange (Alarm) US Not supported 4 times Green (Power) Europe Supported 5 times Orange (Alarm) Australia Supported 6 times Green (Power) Asia Supported 7 times Orange (Alarm) China Supported 8 times Green (Power) Taiwan Supported 9 times Orange (Alarm) Return to the Destination setting mode Note: After setting the destination, confirm the model name and destination in service test print or EEPROM information print. [See 3.4. Verification Items, (1) Service test print, or (2) EEPROM information print.] Purpose: After replacement of the feed roller ass'y or logic board ass'y in repair servicing or in rebox operation, adjust the line feeding in the same way as done at the production site. Operation: Print the LF correction pattern, and select the Pattern No. from 0 to 2 which contains the least streaks or lines. Press theResume/Cancel button the same number of times as the selected Pattern No., and press the Power button. The LF correction will be done. Procedures: 1) In the LF correction mode, press the Resume/Cancel button the specified number of times according to the paper to be used in LF correction listed in the table below, then press the Power button. Time(s) 1 time 2 times 3 times 4 times Paper Type High Resolution Paper Plain paper Paper name Canon HR-101 Canon PB Paper GF-500 (64g/m2) Canon Office Planner HP BrightWhite (90g/m2) Canon Office (80g/m2) Canon Extra (80g/m2) STEINBEIS Vision Classic White 1-27