Canon PowerShot A200 PowerShot A200/A100 Camera User Guide - Page 36

● Printing ● 3 Connect the camera and printer using the direct interface cable. • When you insert the cable, make sure the mark of the cable faces the front of the camera. 4 Press the button to turn the camera power on. If the printer is correctly connected, the icon will appear on the LCD monitor. to Printer DIGITAL Terminal Direct Interface Cable DIF-100 70 When disconnecting the cable from the camera's Digital terminal, be sure to hold the connector at its sides and pull it straight out. Movies cannot be played back or the language cannot be set with SET + MENU button when the camera is connected to a printer. When the printer is disconnected, the symbol will disappear from the LCD monitor and the camera will revert to standard replay mode. Printing An image can be printed when displayed in single replay or selected in index replay. 1 Press or button to select the image you wish to print, and then press the SET button. 2 Set the number of prints, the print style (p. 72) and printing area (p. 74) settings as required. 3 Select [Print] and press the SET button. The image will start to print and, when it is completely finished, the display will revert to the replay screen. ● Printing ● Movies cannot be printed. Cancel Printing Press the SET button while printing. A confirmation screen will appear. Press or button to select [OK] and press the SET button. A print in progress cannot be stopped. Wait until the current image is printed and then cancel before the next one starts. The display will revert to standard replay mode. Printing Errors The error screen is displayed when errors occur during printing (p. 94). Press or button to select [Cancel] or [Resume] and press the SET button. [Resume] may not appear depending on the error details. Select [Stop] in these instances. 71