Canon PowerShot A200 PowerShot A200/A100 Camera User Guide - Page 47

● List of Menu Options and Messages ● List of Messages The following table explains each of the messages that may appear on the LCD monitor. Busy... No CF card Cannot record! CF card error! CF card full Naming error! Change the batteries No image : The camera is recording image data to the CF card. The Replay mode is running. : You attempted to shoot or replay with no CF card installed. : You attempted to shoot with no CF card installed. : There is something wrong with the CF card. : The CF card is too full to store images or accept new print settings. : The camera cannot generate a file name for the image you have shot because the card already contains a folder having the same name as the file to be created, or the file number has already reached the maximum possible value. Display the Rec. menu and set [File Number Reset] to [On]. Save all images you wish to keep into your computer, and reformat the CF card. Please note that formatting will erase all data in the card. : The batteries are dead, and the camera can no longer function. Replace both batteries at the same time with new AA-size alkaline batteries (p. 19) or fully recharged batteries. : No images recorded on CF card. 92 ● List of Menu Options and Messages ● Image too large Incompatible JPEG format Corrupted data RAW Unidentified image Cannot magnify! Cannot rotate! Protected! Too many marks! Unselectable image Exx : You attempted to replay an image whose resolution exceeded 3200 x 2400 pixels or whose file size was too large. : You attempted to replay an incompatible JPEG file. : You attempted to replay an image with corrupted data. : You attempted to replay an image recorded in the RAW format. : You attempted to replay an image file recorded in a unrecognized format (file recorded by a different camera in a proprietary format, etc.). : The image you attempted to magnify was recorded by another camera, or recorded in a format that cannot be magnified, or edited on a computer. : The image you attempted to rotate was recorded by another camera, or recorded in a format that cannot be rotated, or edited on a computer. : You attempted to erase a protected image. : Too many images have been marked for printing. No more images can be marked. : You attempted to set the print settings for a non-JPEG file. : Camera malfunctioned. Turn off the power and turn on again, then re-shoot or replay. If the same message recurs frequently, the camera may be damaged. Note down the error number [xx] and take the camera to a Customer Support Help Desk. If this message appears immediately after you have taken a shot, the camera may not have shot the image. Switch to the Replay mode and check whether the image was actually recorded. 93