Canon PowerShot A200 PowerShot A200/A100 Camera User Guide - Page 50
Using the Household Power Source
View all Canon PowerShot A200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
● Appendices ● Leaving batteries in the camera or charger may damage it causing battery leakage. Remove batteries from the camera or charger and store in a dry cool location when not in use. It takes approximately 110 minutes (for two) and 220 minutes (for four) for the charger to fully recharge the batteries (as determined by testing at Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35 °C (32 to 104 °F). Charging time varies according to ambient temperature and to the batteries' initial charge state. 98 ● Appendices ● Using the Household Power Source (AC Adapter Kit ACK800) Use of the ACK800 optional AC adapter kit is recommended when using the camera continuously for prolonged periods of time and when connecting to a computer. 2 Open the Terminal cover, and connect the adapter's DC plug into the camera's DC IN terminal. • Please unplug the adapter from the power outlet when you have finished using the camera. Be sure that the camera is turned off before connecting or disconnecting the compact power adapter. 1 Connect the power cable to the compact power adapter, and then plug the other end into the electrical outlet. To an electrical outlet Please do not attempt to use any AC adapter other than AC Adapter Kit ACK800 with your camera. Use of a different adapter may result in damage to the camera or to the adapter kit. 99