Canon XC10 User Manual - Page 130
Media Server, Camcorder: Press the MENU button.
View all Canon XC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Media Server Media Server Using the media server function, you can wirelessly view your photos from a connected network device. You will need an access point connected to your network and the software installed on your computer that can play 130 photos on the media server. Operating modes: 1 Camcorder: Open the [}] index screen (A 100). 2 Camcorder: Press the MENU button. [- Wi-Fi Setup] 3 Camcorder: Open the [- Media Server] screen. [1] [- Wi-Fi Setup] > [1] > [- Media Server] • If the camcorder has an access point connection saved, [Connected] appears on the screen and the connection is automatically [- Media Server] established. • If the camcorder does not have an access point connection saved, you will be prompted to do so. Perform the procedure in Wireless Connections Using Wi-Fi (A 119). • Touch [View Information] to see the access point's SSID (network name), connection protocol, camcorder's IP address and camcorder's MAC address. • From the information screen above, touch [Change Connection Point] to connect to a different access point. 4 Computer: Start the media playback software and select [Canon XC10] from the list of servers. 5 Computer: Select the desired photo to play back from the displayed folder. 6 Camcorder: To end the media server function, touch [End] and then touch [OK]. Table of Contents Menus Index