Canon XC10 User Manual - Page 49
Shooting Modes, Setting the Shooting Modes, Manual Exposure
View all Canon XC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Shooting Modes Shooting Modes Operating modes: 49 Setting the Shooting Modes This camcorder offers various shooting modes to help bring your creative intent to life. After you select a mode, you can adjust related settings, such as the shutter speed, using the control dial. You can also use the FUNC. menu or Browser Remote application. 1 While holding down the shooting mode dial button, turn the dial to the desired shooting mode. • The available shooting modes are explained in the sections in the following few pages. • Depending on the shooting mode, you may be able to adjust the aperture, shutter speed, ISO speed or gain. 2 Turn the control dial to adjust the setting, if available. Manual Exposure (n) With this mode, you have full access to menus, settings and other functions. When shooting, you can use the control dial to adjust the aperture, shutter speed or ISO speed/gain*. This mode gives you the most freedom over shooting settings. First, assign the function that will be adjusted by the control dial. * The gain can be adjusted only for clips, not photos. 1 Set the shooting mode dial to n. 2 Press the MENU button. [ System Setup] 3 Open the [Control Dial] submenu. [ System Setup] > [3] (in mode) or [2] (in [Control Dial] mode) > [3] (in [2] (in mode) or mode) 4 Select the desired function to assign to the control dial. [Control Dial] 5 Touch [X]. • The current value will be highlighted in orange. [ Aperture] • During mode, when you select [ ISO/Gain], you can select whether to have control over the ISO speed or gain with the procedure below before touching [X]. 6 Turn the control dial to select the desired value. • You can also select the desired value using the FUNC. menu or Browser Remote application (A 54). Table of Contents Menus Index