Canon XC10 User Manual - Page 95
Touch [Reset Flash Settings]., Touch [Flash Output].
View all Canon XC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Using an Optional Speedlite Flash To set the flash exposure compensation 3 Make sure [Flash Mode] is set to [k Automatic]. 4 Touch [Flash Exp. Comp.]. 5 Select the desired compensation level and then touch [K] to configure other flash settings or [X] 95 to close the menu. • Available levels range from -3 to +3 stops, in 1/3-stop increments. • You can also touch [-] and [+] to select the level. To set the flash output level 3 Make sure [Flash Mode] is set to [n Manual]. 4 Touch [Flash Output]. • An adjustment dial will appear. 5 Drag your finger left/right to move the adjustment dial to the desired setting. • You can also push the joystick left/right to adjust the setting. • Available levels range from 1/128 power* to 1/1 full power in 1/3-stop increments. * 1/64 power for the 270EX II, 320EX and 430EX II Speedlites. 6 Touch [K] to configure other flash settings or [X] to close the menu. To set high-speed sync 3 Touch [High-speed Sync.]. 4 Select [i On] and then touch [K] to configure other flash settings or [X] to close the menu. • Touch [j Off] to turn off high-speed sync. • When this function is set to [i On], the flash is available for all shutter speeds. When set to [j Off], it is available for shutter speeds 1/250 and slower. To reset the flash settings 3 Touch [Reset Flash Settings]. 4 Touch [Yes]. 5 When the confirmation screen appears, touch [OK] and then touch [X]. NOTES • Depending on the Speedlite, some functions may not be available with this camcorder. • When using a Speedlite that is not an EX-series Speedlite*, it may not fire at full power, fire correctly or fire at all. • Using a non-Canon flash (especially high-voltage models) or flash accessories can cause a malfunction of the camcorder or cause the camcorder to not function normally. • The following actions will reset the flash settings. - Attaching or removing the Speedlite. - While the Speedlite is attached to the camcorder, turning off the camcorder or Speedlite. * EX-series Speedlites include the 270EX II, 320EX, 430EX II, 580EX II and 600EX-RT. Table of Contents Menus Index