Canon XC10 User Manual - Page 94
Using an Optional Speedlite Flash, Attaching the Speedlite, Configuring an Attached Flash
View all Canon XC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Using an Optional Speedlite Flash Using an Optional Speedlite Flash Using an optional EX-series Speedlite for EOS cameras (270EX II, 320EX, 430EX II, 580EX II, 600EX-RT), you can enjoy flash photography with this camcorder. If you use the optional 320EX Speedlite, you can use its LED 94 light (video light) when recording clips. For details about using a Speedlite, refer to its instruction manual. Attaching the Speedlite Configuring an Attached Flash Depending on the Speedlite used, the following flash settings may be available: flash mode, flash exposure compensation, flash output level, high-speed sync. You can also reset the flash settings. Operating modes: 1 Press the MENU button. 2 Open the [Flash] submenu. [{ Camera Setup] > [2] > [Flash] [{ Camera Setup] [2] [Flash] To set the flash mode 3 Touch [Flash Mode]. 4 Select [k Automatic] or [n Manual] and then touch [K] to configure other flash settings or [X] to close the menu. Table of Contents Menus Index