Canon XC10 User Manual - Page 33
Inserting and Removing an SD Card, Initializing the Recording Media, Open the [Initialize
View all Canon XC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Preparing Recording Media Inserting and Removing an SD Card 1 Make sure the ACCESS indicator is off. 2 Slide the CARD OPEN switch in the direction of the arrow and open the recording media slot cover. ባ 33 3 Insert the SD card, with the label facing up, all the way into the SD card slot until it clicks. • To remove the SD card, push the SD card once to release it. When the SD card springs out, pull it all the way out. 4 Close the recording media slot cover. • Do not force the cover closed if the SD card is not correctly inserted. ብ ACCESS indicator ACCESS indicator Recording media status On or flashing Accessing the recording media. ቤ A recording media is not inserted or Off it is not being accessed. IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing in red. Failure to do so may result in permanent data loss. - Do not disconnect the power source or turn off the camcorder. - Do not open the recording media slot cover. • SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the SD card as described in the procedure above. NOTES • SD cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the card's content. To write-protect the SD card, set the switch to the LOCK position. Initializing the Recording Media The first time you use any recording media with this camcorder, initialize it first. You can also initialize a recording media to permanently delete all the data it contains. When initializing an SD card, you can select quick initialization, which clears the file allocation table but does not physically erase the stored data, or complete initialization, which deletes all data completely. Operating modes: 1 Press the MENU button. 2 Open the [Initialize /8] submenu. [3 Recording Setup] > [1] > [Initialize /8] 3 Touch [ Memory Card] or [8 Memory Card] and then touch [Initialize]. • If you are initializing a CFast card, skip to step 5. [3 Recording Setup] [1] [Initialize /8] Table of Contents Menus Index