Canon XC10 User Manual - Page 35
Using the Remote Controller, Inserting the Battery, Activating the Remote Sensor
View all Canon XC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using the Remote Controller Using the Remote Controller The camcorder can be operated remotely. You can use the supplied remote controller as described in this section. You can also use the camcorder's network functions and wirelessly connect a compatible device to control the camcorder. For details about wirelessly controlling the camcorder, refer to Browser Remote: 35 Controlling the Camcorder from a Network Device (A 125). Operating modes: Inserting the Battery Insert the supplied lithium button battery into the remote controller before use. 1 Press the tab in the direction of the arrow (ቢ) and pull out the battery holder (ባ). 2 Place the lithium button battery with the + side facing up (ቤ). 3 Insert the battery holder (ብ). ቤ ብ ቢ ባ Activating the Remote Sensor 1 Press the MENU button. 2 Open the [Wireless Remote Control] submenu. [ System Setup] > [2] (in [Wireless Remote Control] mode) or [1] (in 3 Select [i On] and then touch [X]. mode) > [ System Setup] [2] (in [1] (in mode) or mode) [Wireless Remote Control] [j Off ] Using the Remote Controller to Operate the Camcorder When using the remote controller, point it at the camcorder's remote sensor. • The position of the delay switch on the remote controller determines how the remote controller operates. Refer to the following table. Delay switch position 2 ‹ mode Starts and stops recording a video clip. Takes a photo, even while recording video clip. mode Takes a photo after a 2-second delay. Takes a photo immediately. Remote sensor Delay switch (bottom side of remote controller) Table of Contents Menus Index