Canon imageCLASS D680 imageCLASS D680 Printer Guide - Page 97
Resume, Message, Action, The Canon Advanced Printing Technology has detected an internal
View all Canon imageCLASS D680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Message Action Communication error Your computer and printer are not communicating. This happens if the printer power shuts off, the cable is disconnected, or the cable is not bi-directional. Printer Error The Canon Advanced Printing Technology has detected an internal device error. 1 Unplug. 2 Reinsert the power plug into the power outlet. 3 If the same error occurs, unplug the power plug again. 4 If the error persists, contact your Canon authorised service representative. Reference Guide Device Busy The device is being used by another job. Please wait until the job is finished. Port Busy The printer port is being used by other equipment. 5 Printing Temporarily Your computer could not transfer the data to the device due to the Stopped large amount of data, or a data transfer error occurred. Click the Resume button to resume printing. Troubleshooting Waiting to Print The current job has been interrupted by another job. Please wait until the job is finished. Printing will begin automatically. Energy Saver Mode The printer is in the energy saver mode. Incompatible Device The connected device cannot be used. Make sure that the device connected to the specified port is compatible and connected correctly. Fixing Unit Error Fixing unit error. Unplug the power plug, and then wait about 10 minutes before you reinsert the power plug into the power outlet. If the same error occurs, unplug the power plug again. Contact your service representative. 5-7