Cisco WRP400-G1 Administration Guide - Page 101

Advanced Voice Fields Line page A Xfer When Hangup Makes the ATA perform a transfer when a conference call Conf has ended. Select yes or no from the drop-down menu. The default is yes. Voice tab > Line page > Proxy and Registration section Proxy Outbound Proxy Use Outbound Proxy Use OB Proxy In Dialog Register Make Call Without Reg Register Expires SIP proxy server for all outbound requests. SIP Outbound Proxy Server where all outbound requests are sent as the first hop. Enablse the use of an Outbound Proxy. If set to no, the Outbound Proxy and Use OB Proxy in Dialog parameters are ignored. The default is no. Whether to force SIP requests to be sent to the outbound proxy within a dialog. Ignored if the parameter Use Outbound Proxy is no, or the Outbound Proxy parameter is empty. The default is yes. Enable periodic registration with the Proxy parameter. This parameter is ignored if Proxy is not specified. The default is yes. Allow making outbound calls without successful (dynamic) registration by the unit. If No, dial tone will not play unless registration is successful. The default is no. Allow answering inbound calls without successful (dynamic) registration by the unit. If proxy responded to REGISTER with a smaller Expires value, the WRP400 will renew registration based on this smaller value instead of the configured value. If registration failed with an Expires too brief error response, the WRP400 will retry with the value given in the Min-Expires header in the error response. The default is 3600. Cisco Small Business WRP400 Administration Guide 99