Cisco WRP400-G1 Administration Guide - Page 75

Advanced Voice Fields Regional page A • "Outbound Call Codec Selection Codes section" section on page 86 • "Miscellaneous section" section on page 88 Voice tab > Regional page > Call Progress Tones section Dial Tone Second Dial Tone Outside Dial Tone Prompt Tone Busy Tone Reorder Tone Off Hook Warning Tone Ring Back Tone Prompts the user to enter a phone number. Reorder Tone is played automatically when Dial Tone or any of its alternatives times out. The default is 350@-19,440@-19;10(*/0/1+2). Alternative to the Dial Tone when the user dials a three-way call. The default is 420@-19,520@-19;10(*/0/1+2). Alternative to the Dial Tone. It prompts the user to enter an external phone number, as opposed to an internal extension. It is triggered by a, (comma) character encountered in the dial plan. The default is 420@-19;10(*/0/1). Prompts the user to enter a call forwarding phone number. The default is 520@-19,620@-19;10(*/0/1+2). Played when a 486 RSC is received for an outbound call. The default is 480@-19,620@-19;10(.5/.5/1+2). Played when an outbound call has failed or after the far end hangs up during an established call. Reorder Tone is played automatically when Dial Tone or any of its alternatives times out. The default is 480@-19,620@-19;10(.25/.25/1+2). Played when the caller has not properly placed the handset on the cradle. Off Hook Warning Tone is played when Reorder Tone times out. The default is 480@10,620@0;10(.125/.125/1+2). Played during an outbound call when the far end is ringing. The default is 440@-19,480@-19;*(2/4/1+2). Cisco Small Business WRP400 Administration Guide 73