Cisco WRP400-G1 Administration Guide - Page 46

Configuring Dial Plans 3 Digit Sequence , (comma) ! (exclamation point) *xx S0 or L0 Function Enter a comma between digits to play an "outside line" dial tone after a user-entered sequence. EXAMPLE: 9, 1xxxxxxxxxx An "outside line" dial tone is sounded after the user presses 9, and the tone continues until the user presses 1. Enter an exclamation point to prohibit a dial sequence pattern. EXAMPLE: 1900xxxxxxx! The system rejects any 11-digit sequence that begins with 1900. Enter an asterisk to allow the user to enter a 2digit star code. Enter S0 to reduce the short inter-digit timer to 0 seconds, or enter L0 to reduce the long inter-digit timer to 0 seconds. Digit Sequence Examples The following examples show digit sequences that you can enter in a dial plan. In a complete dial plan entry, sequences are separated by a pipe character (|), and the entire set of sequences is enclosed within parentheses. EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) • Extensions on your system EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) [1-8]xx Allows a user dial any three-digit number that starts with the digits 1 through 8. If your system uses four-digit extensions, you would instead enter the following string: [1-8]xxx Cisco Small Business WRP400 Administration Guide 44