Cisco WRP400-G1 Administration Guide - Page 156
To disable SSID-2: <WL_BASIC_SET_2>
UPC - 745883580958
View all Cisco WRP400-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
WRP400 Provisioning Reference C Feature/XML Tag Parameters Examples Basic Wireless Settings for Primary Network wl_net_mode,wl _closed,wl_ssid wl_net_mode: Network mode; mixed, b-only, g-only, or disabled wl_closed: SSID broadcast status; 1 (disabled) or 0 (enabled) wl_ssid: Wireless network name; enter 1 to 32 ASCII characters (backslash character not allowed) To enable SSID-1 and specify the SSID name: wl_net_mode =g-only,wl_closed=0, wl_ssid=aaabbb To configure SSID-1 as a Wireless B network: wl_net_ mode=b-only,wl_ssid= aaabbb To disable SSID-1: wl_net_mode=disabled Basic Wireless Settings for Secondary or Guest Network wl1_net_mode_t mp,wl1_closed,wl1_ssid,ap_isolation< /WL_BASIC_SET_2> IMPORTANT: The secondary network can be enabled only when when wl_net_mode is enabled for the primary network. wl1_net_mode_tmp: Network mode; 1 (enabled), 0 (disabled) wl1_closed: SSID broadcast status; 1 (disabled) or 0 (enabled) wl1_ssid: Wireless network name; enter 1-32 ASCII characters (backslash character not allowed) To enable SSID-2 and specify the SSID name, with guest network: wl1_net_mode_tmp= 1,wl1_ closed=0,wl1_ssid= cccddd, ap_isolation=1 To disable SSID-2: wl1_net_mode_tmp=0 To enable SSID-2 guest network: ap_isolation=1 To prevent SSID-2 configuration from the device GUI: ctrl_ ssid2=0 ap_isolation: For Internet Only Access (Guest Network); 1 (disabled) or 0 (enabled) ctrl_ssid2: Allows Service Provider to lock SSID2; when enabled, user will not be able to configure SSID2 from the device GUI; 1 (enabled) or 0 (disabled) Cisco Small Business WRP400 Administration Guide 154