Cisco WRP400-G1 Administration Guide - Page 150
Status, Status > Router
UPC - 745883580958
View all Cisco WRP400-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Data Fields Status Status B The Status module includes the following pages: • "Status > Router" on page 148 • "Status > Mobile Network" on page 149 • "Status > Local Network" on page 150 • "Status > Wireless Network" on page 150 Status > Router Router Information Firmware Version Current Time Internet MAC Address Router Name Host Name Domain Name Internet Connection Connection Type Internet IP Address Subnet Mask Default Gateway DNS1, DNS2, DNS3 MTU The version number of the current firmware is displayed. The time set on the WRP400 is displayed. The MAC address, as seen by your service provider, is displayed. The name of the WRP400 is displayed. If required by your service provider, this was entered on the Basic Setup screen. If required by your service provider, this was entered on the Basic Setup screen. The type of Internet connection: Automatic Configuration - DHCP, Static IP, PPPoE, PPTP, L2TP, Telstra Cable The IP address of your WRP400, as seen from the Internet. The subnet mask, as seen by users on the Internet The IP address of your service provider server. The addresses of the Domain Name Servers (DNS) servers for your Service Provider. Maximum Transmission Unit. The largest packet size that is permitted for Internet transmission. Can be set manually or automatically. Cisco Small Business WRP400 Administration Guide 148