Cisco WRP400-G1 Administration Guide - Page 160
L2TP Layer 2 Tunneling Protocol, PPPoE Point-to-Point Protocol over
UPC - 745883580958
View all Cisco WRP400-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
WRP400 Provisioning Reference C Feature/XML Tag WAN Type Parameters Examples wan_proto=[mode], [parameters] wan_proto: Internet connection type; dhcp, static, pppoe, pptp, l2tp, heartbeat DHCP Parameters No other settings are required. To configure a DHCP connection: wan_proto=dhcp Static IP Parameters wan_ipaddr: WAN IP address wan_netmask: WAN subnet mask wan_gateway: Gateway IP address To configure a Static IP connection: wan_proto=static,wan_ ipaddr=192.168.0.11,wan_netmask= 255.255.255.128,wan_gateway=192. 168.0. 252 PPPoE (Point-to-Point Protocol over Ethernet) Parameters ppp_username: User name; enter from 1 to 63 ASCII characters ppp_passwd: Password; enter from 1 to 63 ASCII characters ppp_service: Service name; enter from 0 to 63 ASCII characters To configure a PPPPoE connection: wan_proto=pppoe,ppp_ username=adc,ppp_passwd=def To configure a PPPPoE connection type and specify a service name: wan_proto=pppoe, ppp_username=adc,ppp_passwd= def,ppp_service=aaa PPTP (Point-to-Point Tunneling Protocol) Parameters wan_ipaddr: WAN IP address wan_netmask: WAN subnet mask wan_gateway: Gateway IP address To configure a PPTP connection: wan_ proto=pptp,ppp_ username=adc,ppp_passwd=def,wan_ipaddr= 192.168.0.18,wan_netmask= 255.255.255.0,pptp_server_ip=192. 168.0.251 L2TP (Layer 2 Tunneling Protocol) Parameters l2tp_server_ip: Server IP address ppp_username: User name; enter from 1 to 63 ASCII characters ppp_passwd: Password; enter from 1 to 63 ASCII characters To configure an L2TP connection: wan_proto=l2tp, ppp_username= adc,ppp_passwd= def,l2tp_server_ip= 192.168.0.15 Cisco Small Business WRP400 Administration Guide 158