Compaq Armada E700 Compaq ArmadaStation EM Maintenance and Service Guide - Page 35
located behind the retaining latch, Pull forward
View all Compaq Armada E700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Tray The tray is used to align the computer on the expansion base. The left side of the computer should be aligned with the left side of the tray when docking the computer. 1. Prepare the expansion base for disassembly (Section 5.3). 2. Position the expansion base so the front faces forward. 3. Remove the label and screw located behind the retaining latch (Figure 5-5). 4. Pull forward on the retaining latch to remove the tray. Figure 5-5. Removing the Tray Reverse the removal procedure described above to install the tray. Removal and Replacement Procedures 5-5
Removal and Replacement Procedures
5-5
Tray
The tray is used to align the computer on the expansion base. The left side of the
computer should be aligned with the left side of the tray when docking the computer.
1. Prepare the expansion base for disassembly (Section 5.3).
2. Position the expansion base so the front faces forward.
3. Remove the label
and screw
located behind the retaining latch
(Figure 5-5).
4. Pull forward
on the retaining latch to remove the tray.
Figure 5-5.
Removing the Tray
Reverse the removal procedure described above to install the tray.