Compaq ProLiant 6400R Compaq Parallel Database Cluster Model PDC/05000 for Ora - Page 123
Verifying Array Controller Properties, Displaying SCSI Devices in the Devices Windowpane, Windowpane
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Installation and Configuration 5-27 To discover the disk drives: 1. From the CLI window, type the following and press Enter: run config 2. Wait a few minutes for the array controller to scan and discover the installed disk drives. 3. Once the access LED on each drive has blinked, press Enter to return to the command prompt in the CLI window. 4. Type the following and press Enter: show devices 5. Verify the devices discovered are consistent with the installed disk drives. The disk drives will be named in the DISK##### format. Refer to the Compaq StorageWorks documentation for the naming conventions for storage subsystem devices. 6. Close the CLI window. Verifying Array Controller Properties Displaying SCSI Devices in the Devices Windowpane 1. Click on the Windows taskbar Start button. 2. Select Program, Command Console, HSG80 Storage Window. 3. Select Serial Communication and click OK. 4. Select baud rate of 9600 and click Connect. NOTE: If you receive a pop-up window reading "Error scanning subsystem," wait two minutes and retry the connection. SWCC finds installed devices and displays them in a grid. Verifying Controller Properties 1. Double-click a controller icon in the Storage Window to display Controller Properties. Click on the tabs of the Controller Properties screen to confirm that the values in Table 5-1 are set.