Compaq ProLiant 6400R Compaq Parallel Database Cluster Model PDC/05000 for Ora - Page 124

5-28 Compaq Parallel Database Cluster Model PDC/O5000 for Oracle8i and Windows 2000 Administrator Guide Table 5-1 Controller Properties Description General Host Ports Cache Communications LUN Connections Battery Values Allocation class: 0 SCSI version: SCSI-2 Host Port 1 Requested Topology: Loop Hard Host Port 1 Requested Port Address: (user defined) Host Port 1 Actual Port Address: (user defined) Host Port 2 Requested Topology: Loop Hard Host Port 2 Requested Port Address: (user defined) Host Port 2 Actual Port Address: (user defined) Cache flush time (seconds): 10 Respond to internal cache battery condition: selected Confirm that the screen is grayed out (disabled); if not, return to the "Disable Communication LUN" section. Operating System: Windows 2000 Unit Offset: 0 for Port 1 (Rename the default connection names to reflect your configuration. For example, SVR1TOP1, for node 1, top controller, port 1. See "Renaming the Default Connection Names" in this chapter.) Confirm that the battery is fully charged. 2. Repeat step 1 to verify controller properties for the second array controller. 3. Click OK to close the Controller Properties window. Renaming the Default Connection Names Each KGPSA-BC or KGPSA-CB Host Adapter installed in a PDC/O5000 cluster node is automatically assigned a default connection name to identify its connection to a port on an array controller. You must change these default connection names to the format SVRnTOPn or SVRnBOTn required for this PDC.