Compaq ProLiant 6400R Compaq Parallel Database Cluster Model PDC/05000 for Ora - Page 213
Run and Validate Secure Path Manager On All Nodes, Run Disk Management On All Nodes
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Diagnosing and Resolving Shared Disk Problems A-5 Run and Validate Secure Path Manager On All Nodes The Secure Path Manager screens provide information about the shared storage resources in the cluster, including MA8000/EMA12000 Storage Subsystem storagesets, array controller path configurations, drive lettering, and volume labels. To run and validate Secure Path Manager, perform these steps from each node: 1. Use the Secure Path Manager screens to verify that every storageset is visible and that all logical disks and HSG80 Array Controllers are correctly and consistently defined across all nodes. Also confirm that the attributes associated with the shared disks are consistent across all nodes. Refer to the documentation provided with the Secure Path software for detailed information about Secure Path Manager screens. 2. Verify that the version number for Secure Path Manager is correct. Refer to the Compaq Parallel Database Cluster Model PDC/O5000 Certification Matrix for Windows 2000 for version information. 3. Verify that Secure Path Manager has been properly installed on the node. Refer to "Installing Secure Path Software for Windows 2000 for the MA8000/EMA12000 Storage Subsystem" in Chapter 5, "Installation and Configuration," for installation instructions. 4. Repeat steps 1 through 3 for all nodes in the cluster. Run Disk Management On All Nodes Perform these steps from each node: 1. From Disk Management, verify that the shared storage disks from each MA8000/EMA12000 Storage Subsystem are visible. 2. Verify that all shared drive information (drive letters, volume labels, number of partitions, partition sizes, etc.) is consistent across all nodes. 3. Repeat steps 1 and 2 for all nodes in the cluster.