Compaq ProLiant 6400R Compaq Parallel Database Cluster Model PDC/05000 for Ora - Page 127

Verifying Access, Finish, Storage, Start, Program, Command Console, CLI Window., Connection, Selection

Get Compaq ProLiant 6400R PDF manuals and user guides View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 127 highlights

Installation and Configuration 5-31 12. Click Finish to create the virtual disk. The Storage window displays the virtual disk you created. The hourglass on the disk icon indicates that the storageset is being initialized. The drives you used to create the RAID set are highlighted in the Devices window. 13. Repeat steps 1 through 12 to create other virtual disks. 14. Wait for the virtual disk initialization to complete before proceeding. This can take several hours, depending on the size and RAID level of the virtual disk created. 15. Close the Storage window. Verifying Access To verify access to all virtual disks (units): 1. Click on the Windows taskbar Start button. 2. Select Program, Command Console, CLI Window. 3. Click on CLI Window to display the Connection Selection dialog box. 4. Select Serial and click OK to display the Connect Serial dialog box. 5. Select the COM port (the port to which an array controller is connected). 6. Select a baud rate of 9600. 7. Click Connect to display the CLI window. 8. Click on CLI window to display the Connection Selection dialog box. 9. Press Enter to initialize communications. 10. Verify that the ACCESS parameter for each unit is set to ALL by typing the following and pressing Enter: show units full

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
Installation and Configuration
5-31
12.
Click
Finish
to create the virtual disk.
The
Storage
window displays the virtual disk you created. The
hourglass on the disk icon indicates that the storageset is being
initialized. The drives you used to create the RAID set are highlighted in
the Devices
window.
13.
Repeat steps 1 through 12 to create other virtual disks.
14.
Wait for the virtual disk initialization to complete before proceeding.
This can take several hours, depending on the size and RAID level of
the virtual disk created.
15.
Close the
Storage
window.
Verifying Access
To verify access to all virtual disks (units):
1.
Click on the Windows taskbar
Start
button.
2.
Select
Program
,
Command Console
,
CLI Window.
3.
Click on
CLI Window
to display the
Connection
Selection
dialog box.
4.
Select
Serial
and click
OK
to display the
Connect
Serial
dialog box.
5.
Select the COM port (the port to which an array controller is connected).
6.
Select a baud rate of 9600.
7.
Click
Connect
to display the CLI window.
8.
Click on CLI window
to display the
Connection
Selection
dialog box.
9.
Press
Enter
to initialize communications.
10.
Verify that the ACCESS parameter for each unit is set to ALL by typing
the following and pressing
Enter:
show units full