D-Link DXS-3600-EM-8XS CLI Guide - Page 145

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Display Parameters LocPrf Weight Path Description Local preference value as set with the set local-preference route-map configuration command. The default value is 100. Weight of the route as set via autonomous system filters. Autonomous system paths to the destination network. 7-81 show ip bgp inconsistent-as This command is used to display the routes which have the same prefix and different AS path origins. show ip bgp inconsistent-as [{all | rd ASN:NN | vrf VRF-NAME}] Parameters all rd ASN:NN vrf VRF-NAME (Optional) Specifies to display routes of all VPN and VRFs. (Optional) Specifies to display routes with the specified Route Distinguisher. The ASN:NN can be IP address:number or AS number:number. (Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters. Default Command Mode Command Default Level Usage Guideline None. Privileged Mode. Level: 3. (EI Mode Only Command) This command displays the routes which have inconsistent-as originating autonomous systems. Example This example shows the output from the show ip bgp inconsistent-as command, in privileged mode. DXS-3600-32S#show ip bgp inconsistent-as BGP Local Router ID is 10.90.90.10 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete IP Address/Netmask * 40.58.0.0/16 *>i * 40.59.0.0/16 *>i * 40.60.0.0/16 *>i Gateway 103.1.10.1 20.1.1.1 103.1.10.1 20.1.1.1 103.1.10.1 20.1.1.1 Metric 0 0 0 0 0 0 LocPrf 100 100 100 Weight 0 0 0 0 0 0 Path 200 i i 200 i i 200 i i DXS-3600-32S# 137