D-Link DXS-3600-EM-8XS CLI Guide - Page 413

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example shows detailed information about neighbor with IP 10.1.1.2. DXS-3600-32S#show ip ospf neighbor 2.2.2.2 Neighbor ID: 2.2.2.2 Neighbor Options: 2 Neighbor State: Full IP Address: 10.1.1.2 Neighbor Priority: 1 State Changes: 6 times DXS-3600-32S# Display Parameters IP Address of Neighbor Router ID of Neighbor Neighbor Priority Neighbor State Neighbor Options State Changes Description Interface address of the neighbor router. Router ID of the neighbor router. Priority of the neighbor router. State machine of adjacency. Option in the Hello packet sent by neighbor router. The times that neighbor state has changed. 40-29 show ip ospf virtual-link This command is used to show information about OSPF virtual links. show ip ospf virtual-link [area-id neighbor-id] [vrf vrf-name] Parameters area-id neighbor-id vrf vrf-name (Optional) Specifies the area ID which the virtual link belongs to. (Optional) Specifies the router ID of peer of virtual link. (Optional) Specifies to show virtual link information about the OSPF VRF instance. Default Command Mode Command Default Level Usage Guideline None. Privileged EXEC Mode. Level: 3. (EI Mode Only Command) Use this command to show virtual link information. If area-id and neighbor-id is specified, only the virtual link with the same area ID and neighbor ID will be displayed. Example This example shows information about virtual link. DXS-3600-32S#show ip ospf virtual-link Virtual Interface Configuration Transit Virtual Hello Dead Authentication Link Area ID Neighbor Router Interval Interval Status 4.4.4.4 1.1.1.1 10 60 MD5 Up 4.4.4.4 6.6.6.6 10 250 Simple Down DXS-3600-32S# Display Parameters Transit Area ID Virtual Neighbor Router Description The non-backbone area the two endpoints of virtual link have in common. Router ID of the other endpoint of the virtual link. 405