D-Link DXS-3600-EM-8XS CLI Guide - Page 441

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Parameters all configured dynamic sticky address interface Specifies to delete all secure MAC addresses. Specifies to delete configured secure MAC addresses. Specifies to delete secure MAC addresses learned automatically. Specifies to delete sticky secure MAC addresses Specifies to delete the specified secure MAC addresses. Specifies to delete secure MAC addresses on the specified interface. Default Command Mode Command Default Level Usage Guideline None. Privileged EXEC Mode. Level: 8 This command can clear all secure MAC addresses from the address table. When you enter an interface-id, the command deletes secure the MAC address from the interface. Example This example shows how to delete the all secure addresses from the MAC address table. DXS-3600-32S#clear port-security all DXS-3600-32S# Example This example shows how to delete a specified secure address from MAC address table. DXS-3600-32S#clear port-security configured address 0008.0070.0007 DXS-3600-32S# Example This example shows how to delete a specific dynamic secure address from the MAC address table on the interface tenGigabitEthernet 1/0/1. DXS-3600-32S#clear port-security dynamic interface tenGigabitEthernet 1/0/1 DXS-3600-32S# 44-5 show port-security This command is used to show the port security settings. show port-security [address] [interface ] Parameters address interface Specifies to display all the secure MAC addresses on all interfaces or a specified interface. Specifies to display port security settings for the specified interface. Default Command Mode Command Default Level None. Privileged EXEC Mode. Level: 8 433