D-Link DXS-3600-EM-8XS CLI Guide - Page 209

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Default Command Mode Command Default Level Usage Guideline None. Global Configuration Mode. Level: 8 This command configures the Option 60 relay rules. Note that different strings can be specified with the same relay server and the same strings can be specified with multiple relay servers. A string map to a DHCP server has two modes: (1) One is exact-match and the (2) other is partial-match. The exact-match is that the DHCP client string needs exactly match the specified string. The partial-match is that the DHCP client string only needs partially match the specified string. You can verify your settings by entering the show ip dhcp relay option60 command. Example This example shows how to add an Option 60 string "MSFT 5.0" relay entry to 10.90.90.1. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip dhcp relay option60 identifier "MSFT 5.0" relay 10.90.90.1 DXS-3600-32S(config)# 13-6 ip dhcp relay option60 default This command is used to add default relay servers, used by the DHCP relay Option 60. The no form of this command deletes the Option 60 default relay server. ip dhcp relay option60 default relay ip-address no ip dhcp relay option60 default Parameters ip-address Specifies the IP address of the DHCP server. Default Command Mode Command Default Level Usage Guideline None. Global Configuration Mode. Level: 8 When there is no matching server found for the packet, based on the Option 60 string, for the relay servers to use, it will be determined by the default relay server setting. You can verify your settings by entering the show ip dhcp relay option60 command. Example This example shows how to add the default relay servers to use by the DHCP relay Option 60. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip dhcp relay option60 default relay 10.90.90.90 DXS-3600-32S(config)# 13-7 show ip dhcp relay option60 This command is used to show the entries of the DHCP relay Option 60. 201