D-Link DXS-3600-EM-8XS CLI Guide - Page 588

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 59-5 password This command is used to create a password used on the line interface. The no form of this command will disable the use of a password. password {password | encrypted encrypted-password} no password Parameters password encrypted encrypted-password Specifies to identify the plain text password. Specifies to identify that the password entered is encrypted. Specifies the encrypted pasword password used. This password must be between 1 to 26 characters long. Leading spaces will be ignored and spaces in between or at the end are regarded as part of the password. Default Command Mode Command Default Level Usage Guideline By default, there is no password specified. Line Configuration Mode. Level: 15 None. Example This example shows how to create a password of '12345'. DXS-3600-32S#configure terminal DXS-3600-32S(config)#line console DXS-3600-32S(config-line)#password 12345 DXS-3600-32S(config-line)# 59-6 login (Line) This command is used to configure the line login method login no login Parameters Default Command Mode Command Default Level Usage Guideline None. By default, no login is configured. Line Configuration Mode. Level: 15 None. Example This example shows how to use the line login command. DXS-3600-32S(config-line)#login DXS-3600-32S(config-line)# 59-7 enable This command is used to enter a privilege level. enable [privilege-level] 580