D-Link DXS-3600-EM-8XS CLI Guide - Page 596

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Command Default Level Usage Guideline Level: 15 This command enables the log statistics function. The statistics begins when the function is enabled. If you run no logging count, the statistics function is disabled and the statistics data is deleted. Example This example shows how to enable the log statistics function. DXS-3600-32S#configure terminal DXS-3600-32S(config)#logging count DXS-3600-32S(config)# 60-8 clear logging This command is used to clear the logs from the buffer. clear logging Parameters Default Command Mode Command Default Level Usage Guideline None. None. Global Configuration Mode. Level: 15 This command clears the log packets from the memory buffer. You cannot clear the statistics of the log packets. Example This example shows how to clear the log packets from the memory buffer. DXS-3600-32S#configure terminal DXS-3600-32S(config)#clear logging DXS-3600-32S(config)# 60-9 show logging This command is used to display the logs in the buffer. show logging Parameters Default Command Mode Command Default Level Usage Guideline None. None. EXEC Mode. Level: 15 This command only allows you to view the log files. You cannot use this command to view other non-log files. 588