D-Link DXS-3600-EM-8XS CLI Guide - Page 488

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide 48-17 show class-map This command is used to display the quality of service (QoS) class maps, which define the match criteria to classify traffic. show class-map [class-map-name] Parameters class-map-name Specifies the name of the class for the class map. The name can be a maximum of 32 alphanumeric characters. Default Command Mode Command Default Level Usage Guideline None. Privileged EXEC Mode. Level: 15 If the class map name is not specified, all class map information will be displayed. Example This example shows the output from the show class-map command. DXS-3600-32S#show class-map Class Map class1 Match access-group 101 Class Map class2 Match access-group 8 DXS-3600-32S# 48-18 show mls qos interface This command is used to display the QoS configuration on the interface. show mls qos interface [INTERFACE-ID [,|-]] [policers] Parameters INTERFACE-ID [,|-] policers Specifies the interface ID for which the QoS configure information will be displayed. You can specify multiple interface IDs, which are separated by commas (,) or hyphens (-). No space is before or after the commas or hyphens. Specifies to only show the police associated with specify interface. Default Command Mode Command Default Level Usage Guideline None. Privileged EXEC Mode. Level: 15 If no interface ID is specified, all interfaces QoS information will be display. If the key policers is specified, just the policy map information of the specified interface will be displayed. 480