D-Link DXS-3600-EM-8XS CLI Guide - Page 219

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide Example This example shows how to set the number of the packets, sent by the ping operation as 3. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip dhcp ping packet 3 DXS-3600-32S(config)# 14-11 ip dhcp ping timeout This command is used to configure the timeout that the DHCP server waits for response when it uses the ping operation to detect the address conflict in the global configuration mode. The no form of this command can be used to restore it to the default configuration. ip dhcp ping timeout milli-seconds no ip dhcp ping timeout Parameters milli-seconds Specifies the time that the DHCP server waits for ping response in the range 10 to 2000 milliseconds. Default Command Mode Command Default Level Usage Guideline The default timeout is 100 milliseconds. Global Configuration Mode. Level: 8 This command defines the time that the DHCP server waits for a ping response packet. Example In the configuration example below, the waiting time of the ping response packet is 600ms. DXS-3600-32S#configure terminal DXS-3600-32S(config)#ip dhcp ping timeout 600 DXS-3600-32S(config)# 14-12 ip dhcp pool This command is used to define a name of the DHCP address pool and enter into the DHCP address pool configuration mode in the global configuration mode. The no form of this command can be used to delete the DHCP address pool. ip dhcp pool pool-name no ip dhcp pool pool-name Parameters pool-name Specifies a string of characters and positive integers, for instance, mypool or 1. Default Command Mode Command Default Level Usage Guideline No DHCP address pool is defined by default. Global Configuration Mode. Level: 8 Execute the command to enter into the DHCP address pool configuration mode, in this configuration mode, configure the IP address range, the DNS server and the default gateway. 211