Dell Dimension E520 Owner's Manual - Page 71
Align the notch on the bottom of the module with the crossbar in the connector.
View all Dell Dimension E520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
1 Follow the procedures in "Before You Begin" on page 59. 2 Lay the computer on its side so that the system board is on the bottom of the inside of the computer. 3 Press out the securing clip at each end of the memory module connector. 1 2 3 1 memory connector closest to 2 securing clips (2) processor 3 connector 4 Align the notch on the bottom of the module with the crossbar in the connector. 3 2 1 1 cutouts (2) 4 crossbar 4 2 memory module 3 notch Removing and Installing Parts 71
Removing and Installing Parts
71
1
Follow the procedures in "Before You Begin" on page59.
2
Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3
Press out the securing clip at each end of the memory module connector.
4
Align the notch on the bottom of the module with the crossbar in the connector.
1
memory connector closest to
processor
2
securing clips (2)
3
connector
1
cutouts (2)
2
memory module
3
notch
4
crossbar
2
3
1
3
2
1
4