Dell Dimension E520 Owner's Manual - Page 80
Snap the card retention mechanism into place, securing the x16 PCI card.
View all Dell Dimension E520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
3 4 2 5 1 6 1 alignment bar 4 alignment guide 2 fully seated card 5 bracket within slot 3 not fully seated card 6 bracket caught outside of slot 9 If you replaced a card that was already installed in the computer and you removed the retention mechanism, you may reinstall the retention mechanism. 10 Before replacing the card retention mechanism, ensure that: • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 11 Snap the card retention mechanism into place, securing the x16 PCI card. 80 Removing and Installing Parts
80
Removing and Installing Parts
9
If you replaced a card that was already installed in the computer and you removed the retention
mechanism, you may reinstall the retention mechanism.
10
Before replacing the card retention mechanism, ensure that:
•
The tops of all cards and filler brackets are flush with the alignment bar.
•
The notch in the top of the card or filler bracket fits around the alignment guide.
11
Snap the card retention mechanism into place, securing the x16 PCI card.
1
alignment bar
2
fully seated card
3
not fully seated card
4
alignment guide
5
bracket within slot
6
bracket caught outside of slot
2
3
6
5
4
1