Dell Latitude D630 ATG User's Guide - Page 118
Hinge Cover
View all Dell Latitude D630 ATG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Hinge Cover CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover. 1 Follow the procedures in "Before You Begin" on page 115. 2 Turn the computer top-side up, and then open the display all the way (180 degrees) so that the display rests on your work surface. NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously. Removing the hinge cover in a different way than described may cause the plastic to break. 1 2 3 1 hinge cover 2 plastic scribe 3 indent 3 Starting on the right side of the computer, use a plastic scribe to pry up the hinge cover. Lift the cover away from the computer going from the right toward the left, and lay the cover aside. 4 To replace the hinge cover, insert the left edge of the cover into place. 5 Press from left to right until the cover snaps into place. 118 Adding and Replacing Parts