Dell Latitude D630 ATG User's Guide - Page 88

Error Messages, Product, Information Guide

Page 88 highlights

Error Messages Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 153) as you complete these checks. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. If the message is not listed, see the documentation for the operating system or the program that was running when the message appeared. AU XI LIAR Y DEVICE FAIL URE - The touch pad, track stick, or external mouse may be faulty. For an external mouse, check the cable connection. Enable the Pointing Device option in the system setup program. If the problem persists, contact Dell (see "Obtaining Assistance" on page 149). BA D COMMAND OR FI LE NAME - Ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct pathname. CACHE D ISABLED DUE TO FAIL URE - The primary cache internal to the microprocessor has failed. Contact Dell (see "Obtaining Assistance" on page 149). CD DRIVE CONTROLLER FAIL URE - The CD drive does not respond to commands from the computer (see "Dell Support Utility" on page 84). DATA ERROR - The hard drive cannot read the data (see "Dell Support Utility" on page 84). DE C R EA SI N G AVAIL ABLE MEMORY - One or more memory modules may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory Problems" on page 94). DI SK C: FAI LED I NITIAL IZATION - The hard drive failed initialization. Run the hard drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 81). DRIVE NOT READY - The operation requires a hard drive in the bay before it can continue. Install a hard drive in the hard drive bay (see "Drive Problems" on page 85). ERROR READING PCMCIA CA RD - The computer cannot identify the PC Card. Reinsert the card or try another PC Card (see "Installing a PC Card or ExpressCard" on page 66). E XT E N D E D M EM O RY S IZ E HA S C H A N G E D - The amount of memory recorded in NVRAM does not match the memory installed in the computer. Restart the computer. If the error appears again, contact Dell (see "Obtaining Assistance" on page 149). T H E F I L E B E I N G C O P I E D I S T O O L A R G E F O R T H E D E S T I N A T I O N D R I V E - The file that you are trying to copy is too large to fit on the disk, or the disk is too full. Try copying the file to a different disk or use a larger capacity disk. A F I L E N A M E C A N N O T C O N T A I N A N Y O F T H E F O L L O W I N G C H A R A C T E R S Do not use these characters in filenames. GATE A20 FAILURE - A memory module may be loose. Reinstall the memory modules and, if necessary, replace them (see "Memory Problems" on page 94). GENERAL FAILURE - The operating system is unable to carry out the command. The message is usually followed by specific information-for example, Printer out of paper. Take the appropriate action. 88 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

88
Troubleshooting
Error Messages
Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 153) as you complete these
checks.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product
Information Guide
.
If the message is not listed, see the documentation for the operating system or the program that was
running when the message appeared.
A
UXILIARY
DEVICE
FAILURE
The touch pad, track stick, or external mouse may be faulty. For an external
mouse, check the cable connection. Enable the Pointing Device option in the system setup program. If
the problem persists, contact Dell (see "Obtaining Assistance" on page 149).
B
AD
COMMAND
OR
FILE
NAME
Ensure that you have spelled the command correctly, put spaces in the
proper place, and used the correct pathname.
C
ACHE
DISABLED
DUE
TO
FAILURE
The primary cache internal to the microprocessor has failed. Contact
Dell (see "Obtaining Assistance" on page 149).
CD
DRIVE
CONTROLLER
FAILURE
The CD drive does not respond to commands from the computer (see
"Dell Support Utility" on page 84).
D
ATA
ERROR
The hard drive cannot read the data (see "Dell Support Utility" on page 84).
D
ECREASING
AVAILABLE
MEMORY
One or more memory modules may be faulty or improperly seated.
Reinstall the memory modules and, if necessary, replace them (see "Memory Problems" on page 94).
D
ISK
C:
FAILED
INITIALIZATION
The hard drive failed initialization. Run the hard drive tests in the Dell
Diagnostics (see "Dell Diagnostics" on page 81).
D
RIVE
NOT
READY
The operation requires a hard drive in the bay before it can continue. Install a hard
drive in the hard drive bay (see "Drive Problems" on page 85).
E
RROR
READING
PCMCIA
CARD
The computer cannot identify the PC Card. Reinsert the card or try
another PC Card (see "Installing a PC Card or ExpressCard" on page 66).
E
XTENDED
MEMORY
SIZE
HAS
CHANGED
The amount of memory recorded in NVRAM does not match
the memory installed in the computer. Restart the computer. If the error appears again, contact Dell (see
"Obtaining Assistance" on page 149).
T
HE
FILE
BEING
COPIED
IS
TOO
LARGE
FOR
THE
DESTINATION
DRIVE
The file that you are trying to copy is
too large to fit on the disk, or the disk is too full. Try copying the file to a different disk or use a larger
capacity disk.
A
FILENAME
CANNOT
CONTAIN
ANY
OF
THE
FOLLOWING
CHARACTERS
: \ / : * ? “ < > | —
Do not use these
characters in filenames.
G
ATE
A20
FAILURE
A memory module may be loose. Reinstall the memory modules and, if necessary,
replace them (see "Memory Problems" on page 94).
G
ENERAL
FAILURE
The operating system is unable to carry out the command. The message is usually
followed by specific information—for example,
Printer out of paper
.
Take the appropriate
action.