Dell Latitude D630 ATG User's Guide - Page 89

the hard drive see Hard drive problems on and boot the computer from media. Then shut

Page 89 highlights

HA RD- D ISK D RI VE CONFI GURATION ER R O R - The computer cannot identify the drive type. Shut down the computer, remove the hard drive (see "Hard drive problems" on page 86), and boot the computer from media. Then shut down the computer, reinstall the hard drive, and restart the computer. Run the HardDisk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 81). HA RD- D ISK D RI VE C O N T R O L L E R F A I LU R E 0 - The hard drive does not respond to commands from the computer. Shut down the computer, remove the hard drive (see "Hard drive problems" on page 86), and boot the computer from media. Then shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard-Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 81). HA RD-D ISK D RI VE F AILURE - The hard drive does not respond to commands from the computer. Shut down the computer, remove the hard drive (see "Hard drive problems" on page 86), and boot the computer from media. Then shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard-Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 81). HA RD-D ISK D RI VE READ FAIL URE - The hard drive may be defective. Shut down the computer, remove the hard drive (see "Hard drive problems" on page 86), and boot the computer from media. Then shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard-Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 81). INSERT BOOTA BLE MEDIA - The operating system is trying to boot to nonbootable media. Insert bootable media. I N V A L I D C O N F I G U R A T I O N I N F O R M A T I O N - P L E A S E R U N S YS T E M S E T U P P R O G R A M - The system configuration information does not match the hardware configuration. The message is most likely to occur after a memory module is installed. Correct the appropriate options in the system setup program (see "System Setup Program" on page 103). KEYBOARD CLOCK LI NE FAIL URE - For external keyboards, check the cable connection. Run the Keyboard Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 81). KEYBOARD CONTROLLER FA ILURE - For external keyboards, check the cable connection. Restart the computer, and avoid touching the keyboard or the mouse during the boot routine. Run the Keyboard Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 81). KEYBOARD D ATA LI NE FAI LURE - For external keyboards, check the cable connection. Run the Keyboard Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 81). KEYBOARD STUCK KEY FA ILURE - For external keyboards or keypads, check the cable connection. Restart the computer, and avoid touching the keyboard or keys during the boot routine. Run the Stuck Key test in the Dell Diagnostics (see "Dell Diagnostics" on page 81). M E M O R Y A D D R E S S L I N E F A I L U R E A T A D D R E S S , R E A D V A L U E E X P E C T I N G V A L U E - A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory Problems" on page 94. MEMO RY AL LOCATION ERROR - The software you are attempting to run is conflicting with the operating system, another program, or a utility. Shut down the computer, wait 30 seconds, and then restart it. Try to run the program again. If the error message still appears, see the software documentation. Troubleshooting 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

Troubleshooting
89
H
ARD
-
DISK
DRIVE
CONFIGURATION
ERROR
The computer cannot identify the drive type. Shut down the
computer, remove the hard drive (see "Hard drive problems" on page 86), and boot the computer from
media. Then shut down the computer, reinstall the hard drive, and restart the computer. Run the Hard-
Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 81).
H
ARD
-
DISK
DRIVE
CONTROLLER
FAILURE
0—
The hard drive does not respond to commands from the
computer. Shut down the computer, remove the hard drive (see "Hard drive problems" on page 86), and
boot the computer from media. Then shut down the computer, reinstall the hard drive, and restart the
computer. If the problem persists, try another drive. Run the Hard-Disk Drive tests in the Dell
Diagnostics (see "Dell Diagnostics" on page 81).
H
ARD
-
DISK
DRIVE
FAILURE
The hard drive does not respond to commands from the computer. Shut
down the computer, remove the hard drive (see "Hard drive problems" on page 86), and boot the
computer from media. Then shut down the computer, reinstall the hard drive, and restart the computer.
If the problem persists, try another drive. Run the Hard-Disk Drive tests in the Dell Diagnostics (see
"Dell Diagnostics" on page 81).
H
ARD
-
DISK
DRIVE
READ
FAILURE
The hard drive may be defective. Shut down the computer, remove
the hard drive (see "Hard drive problems" on page 86), and boot the computer from media. Then shut
down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another
drive. Run the Hard-Disk Drive tests in the Dell Diagnostics (see "Dell Diagnostics" on page 81).
I
NSERT
BOOTABLE
MEDIA
The operating system is trying to boot to nonbootable media. Insert bootable
media.
I
NVALID
CONFIGURATION
INFORMATION
-
PLEASE
RUN
S
YSTEM
S
ETUP
P
ROGRAM
The system configuration
information does not match the hardware configuration. The message is most likely to occur after a
memory module is installed. Correct the appropriate options in the system setup program (see "System
Setup Program" on page 103).
K
EYBOARD
CLOCK
LINE
FAILURE
For external keyboards, check the cable connection. Run the Keyboard
Controller
test in the Dell Diagnostics (see "Dell Diagnostics" on page 81).
K
EYBOARD
CONTROLLER
FAILURE
For external keyboards, check the cable connection. Restart the
computer, and avoid touching the keyboard or the mouse during the boot routine. Run the Keyboard
Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 81).
K
EYBOARD
DATA
LINE
FAILURE
For external keyboards, check the cable connection. Run the Keyboard
Controller test in the Dell Diagnostics (see "Dell Diagnostics" on page 81).
K
EYBOARD
STUCK
KEY
FAILURE
For external keyboards or keypads, check the cable connection. Restart
the computer, and avoid touching the keyboard or keys during the boot routine. Run the Stuck Key
test
in the Dell Diagnostics (see "Dell Diagnostics" on page 81).
M
EMORY
ADDRESS
LINE
FAILURE
AT
ADDRESS
,
READ
VALUE
EXPECTING
VALUE
A memory module may be
faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them (see "Memory
Problems" on page 94.
M
EMORY
ALLOCATION
ERROR
The software you are attempting to run is conflicting with the operating
system, another program, or a utility. Shut down the computer, wait 30 seconds, and then restart it. Try
to run the program again. If the error message still appears, see the software documentation.