Dell Latitude D630 ATG User's Guide - Page 124
clicks into place. If you do not feel the click, remove the module and reinstall it.
View all Dell Latitude D630 ATG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
5 Ground yourself and install the new memory module: NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure. a Align the notch in the module connector with the tab in the connector slot. b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. 1 2 1 tab 2 notch To add or replace a memory module in the DIMM B connector: NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMMA" before you install a module in the connector labeled "DIMMB." Insert memory modules at a 45degree angle to avoid damaging the connector. 1 Follow the procedures in "Before You Begin" on page 115. 2 Turn the computer bottom-side up, loosen the captive screw in the memory module cover, and then remove the cover. 124 Adding and Replacing Parts