Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 12
Installing front bezel, Storage device, Removing 2.5–inch hard drive assembly
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing front bezel 1 Insert the tabs of the bezel into the slots on the chassis. 2 Press the bezel until the tabs click into place. 3 Install the cover. 4 Follow the procedure in After working inside your computer. Storage device Removing 2.5-inch hard drive assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the cover. 3 To remove the 2.5-inch drive assembly: a Disconnect the SATA cable and power cable from the drive [1]. b Push the tab to release drive assembly from the chassis [2]. 12 Disassembly and reassembly
Installing front bezel
1
Insert the tabs of the bezel into the slots on the chassis.
2
Press the bezel until the tabs click into place.
3
Install the
cover
.
4
Follow the procedure in
After working inside your computer
.
Storage device
Removing 2.5–inch hard drive assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
cover
.
3
To remove the 2.5-inch drive assembly:
a
Disconnect the SATA cable and power cable from the drive [1].
b
Push the tab to release drive assembly from the chassis [2].
12
Disassembly and reassembly