Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 36
System board, Removing the system board
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3 Install the: a optical drive b cooling shroud c 2.5 inch hard drive assembly d front bezel e cover 4 Follow the procedure in After working inside your computer. System board Removing the system board 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b front bezel c 2.5 inch hard drive assembly d cooling shroud e optical drive f M.2 PCIe SSD g heat sink assembly h memory module i processor j expansion card k SD card 3 Disconnect the following cables from the system board: a speaker [1] b 2.5-inch drive [2] c optical drive [3] d data cable [4] 36 Disassembly and reassembly
3
Install the:
a
optical drive
b
cooling shroud
c
2.5 inch hard drive assembly
d
front bezel
e
cover
4
Follow the procedure in
After working inside your computer
.
System board
Removing the system board
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
cover
b
front bezel
c
2.5 inch hard drive assembly
d
cooling shroud
e
optical drive
f
M.2 PCIe SSD
g
heat sink assembly
h
memory module
i
processor
j
expansion card
k
SD card
3
Disconnect the following cables from the system board:
a
speaker [1]
b
2.5–inch drive [2]
c
optical drive [3]
d
data cable [4]
36
Disassembly and reassembly