Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 25

Installing heat sink assembly, Processor, Removing the processor

Get Dell OptiPlex 5055 A Series Small Form Factor PDF manuals and user guides View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Installing heat sink assembly 1 Align the screws of the heat sink assembly with the holders on the system board. 2 Place the heat sink assembly on the processor. 3 Replace the 6 captive screws to secure the heat sink assembly to the system board. NOTE: Tighten the screws based on the order given in the system board. 4 Connect the heat sink assembly cable to the connector on the system board. 5 Install the: a optical drive b cooling shroud c 2.5 inch hard drive assembly d front bezel e cover 6 Follow the procedure in After working inside your computer. Processor Removing the processor 1 Follow the procedure in Before working inside your computer. 2 Remove the: Disassembly and reassembly 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Installing heat sink assembly
1
Align the screws of the heat sink assembly with the holders on the system board.
2
Place the heat sink assembly on the processor.
3
Replace the 6 captive screws to secure the heat sink assembly to the system board.
NOTE:
Tighten the screws based on the order given in the system board.
4
Connect the heat sink assembly cable to the connector on the system board.
5
Install the:
a
optical drive
b
cooling shroud
c
2.5 inch hard drive assembly
d
front bezel
e
cover
6
Follow the procedure in
After working inside your computer
.
Processor
Removing the processor
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
Disassembly and reassembly
25