Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 30
Installing SD card reader, Power supply unit, Removing power supply unit — PSU
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing SD card reader 1 Place the SD card in the slot on the system board. 2 Tighten the 6 screw to secure the SD card reader to the front panel door. 3 Install the: a M.2 PCIe SSD b optical drive c cooling shroud d 2.5 inch hard drive assembly e front bezel f cover 4 Follow the procedure in After working inside your computer. Power supply unit Removing power supply unit - PSU 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b front bezel 30 Disassembly and reassembly
Installing SD card reader
1
Place the SD card in the slot on the system board.
2
Tighten the 6 screw to secure the SD card reader to the front panel door.
3
Install the:
a
M.2 PCIe SSD
b
optical drive
c
cooling shroud
d
2.5 inch hard drive assembly
e
front bezel
f
cover
4
Follow the procedure in
After working inside your computer
.
Power supply unit
Removing power supply unit — PSU
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
cover
b
front bezel
30
Disassembly and reassembly