Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 27
Intrusion switch, Removing intrusion switch
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
6 Install the: a heat sink assembly b optical drive c cooling shroud d 2.5 hard drive assembly e front bezel f cover 7 Follow the procedure in After working inside your computer. Intrusion switch Removing intrusion switch 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b front bezel c cooling shroud 3 To the intrusion switch: a Disconnect the intrusion switch cable from the connector on the system board [1]. b Slide the intrusion switch and push it to remove from the chassis [2]. Disassembly and reassembly 27
6
Install the:
a
heat sink assembly
b
optical drive
c
cooling shroud
d
2.5 hard drive assembly
e
front bezel
f
cover
7
Follow the procedure in
After working inside your computer
.
Intrusion switch
Removing intrusion switch
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
cover
b
front bezel
c
cooling shroud
3
To the intrusion switch:
a
Disconnect the intrusion switch cable from the connector on the system board [1].
b
Slide the intrusion switch and push it to remove from the chassis [2].
Disassembly and reassembly
27