Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 17
Installing PCIe expansion card, Cooling shroud, Removing the cooling shroud
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
5 Repeat the steps to remove any additional PCIe expansion cards. Installing PCIe expansion card 1 Insert the expansion card into the connector on the system board. 2 Press the expansion card until it clicks into place. 3 Close the expansion card latch and press it until it clicks into place. 4 Install the: a front bezel b cover 5 Follow the procedure in After working inside your computer. Cooling shroud Removing the cooling shroud NOTE: Cooling shroud is encompasses the processor assembly and it must be removed to access the processor. 1 Follow the procedure in Before working inside your computer. 2 Remove the cover. 3 To remove cooling shroud: a Holding the touch points, pull the fan duct bracker outwards to release the cooling shroud. Disassembly and reassembly 17