Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 29
VGA Daughterboard, Removing the VGA daughter board, SD card, Removing SD card reader
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
VGA Daughterboard Removing the VGA daughter board 1 Follow the procedure in Before Working Inside Your Computer. 2 Remove the: a Back Cover b Bezel 3 Open the Front Bezel Door 4 To remove the VGA daughter board: a Remove the screws that secure the VGA connector to the computer [1]. b Slide the VGA connector to release it from the computer [2]. c Remove the screw that secures the VGA daughter board to the computer [3]. d Lift the VGA daughter board using the handle to remove it from the computer [4]. Installing the VGA daughter board 1 Align the VGA daughter board with the screw holder on the system board. 2 Tighten the screw to secure the VGA daughter board to the system board. 3 Insert the VGA connector into the slot at the back of the computer. 4 Tighten the screws to secure the VGA connector to the computer. 5 Install the: a Bezel b Cover 6 Follow the procedure in After Working Inside Your Computer. SD card Removing SD card reader 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b front bezel c 2.5 inch hard drive assembly d cooling shroud e optical drive f M.2 PCIe SSD 3 To remove the SD card reader: a Release the power cables from the retention clips on the SD card reader enclosure [1]. b Remove the 6 screws that secure the SD card reader [2]. c Lift the SD card reader away from the computer [3]. Disassembly and reassembly 29