Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 19
Installing cooling shroud, Coin-cell battery, Removing coin cell battery
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing cooling shroud NOTE: When inserting the shroud on the processor assembly, please ensure that the data and power cables of the optical drive do not get caught inside the shroud. 1 Align the slots on the cooling shroud, with the screws on the heat sink. 2 Insert the cooling shroud over the processor assembly. 3 Install the cover. 4 Follow the procedure in After working inside your computer. Coin-cell battery Removing coin cell battery 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b cooling shroud c expansion card 3 To remove the coin cell battery: a Using a plastic scribe press the release latch until the coin cell battery pops out [1]. Disassembly and reassembly 19
Installing cooling shroud
NOTE:
When inserting the shroud on the processor assembly, please ensure that the data and power cables of the optical drive
do not get caught inside the shroud.
1
Align the slots on the cooling shroud, with the screws on the heat sink.
2
Insert the cooling shroud over the processor assembly.
3
Install the
cover
.
4
Follow the procedure in
After working inside your computer
.
Coin-cell battery
Removing coin cell battery
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
cover
b
cooling shroud
c
expansion card
3
To remove the coin cell battery:
a
Using a plastic scribe press the release latch until the coin cell battery pops out [1].
Disassembly and reassembly
19