Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 53
Enable Secure Digital SD Card Enabled by default, Secure Digital SD Card Read-Only mode
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Option SATA Operation Drives Smart Reporting USB Configuration USB PowerShare Audio Miscellaneous Devices Table 7. Video Option Multi-Display Primary Display Description • COM4 (Disabled by default) Allows you to configure the operating mode of the integrated hard drive controller. • Disabled = The SATA controllers are hidden • AHCI (Enabled by default) • RAID ON = SATA is configured to support RAID mode (Disabled by default) Allows you to enable or disable the various drives on-board: • SATA-0 (enabled by default) • SATA-1 • SATA-2 • SATA-3 • M.2 PCIe SSD-0 This field controls whether hard drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default. Allows you to enable or disable the integrated USB controller for: • Enable Boot Support • Enable Front USB Ports • Enable Rear USB Ports All the options are enabled by default. This option allows you to charge the external devices, such as mobile phones, music player. This option is disabled by default. Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by default. • Enable Microphone • Enable Audio • Enable Internal Speaker The options are selected by default. Allows you to enable or disable the Miscellaneous Devices. The option are • Enable Secure Digital (SD) Card (Enabled by default) • Secure Digital (SD) Card Read-Only mode Description The option is selected by default. Allows you to select the primary display when multiple controllers are available in the system. • Auto (default) • Integrated Graphics NOTE: If you do not select Auto, the on-board graphics device will be present and enabled. System setup 53